Remington Society

Spud,
I just spent 30 minutes on an answer to your question and it was lost in transmission.
Send me an e mail. at Stokes3937@Charter.net and I will send you the information that you need from the April 1980 issue of the American Riflrman.
Ron

http://www.stevespages.com/page7b.htm

35Rem,
Try this site.

Porkypine,
Did you ever find the mag. you were looking for ?

WTB I am looking for a box magazine for a 1899 Remington Lee .Serial # 101858. The barrel is marked .30 USA which I believe is .30/40. It appears that this was one of the 2000 shipped to the the Michigan National Guard.
Any leads would be very helpful.

Remington model 8 81 stripper clip 35 remington 300 sav
snowfun1962 ( 50) 100.0%
0 $19.99
$3.00
3d 23h
On E Bay as of 2/24/10 4:33 EST

Thank you for making this site available to anyone who appreciates Remington arms. As you can see I only signed on a short time ago. The exchange of information that I have found here is invaluable. Today I am looking for a box magazine. The rifle is an 1899 Remington Lee , serial # 101858. The barr...

I have seen several on E Bay

Go to page7b Steves place Manuels

www.stevespages.com/page7b.htm

Try this link. You may have to copy and paste.
Scroll down to Remington Model 11 shotgun.

Numrich Arms has the parts that you are looking for. Both the cover and the screw.
You can find them online.

Ron in southeast Michigan

Problem Solved, If you have been reading the previous posts you will know that my problem was an undersized follower. Thanks to Jim I found that the diameter should be at least .485. Solution: I first cut a section out of 45/70 cartridge case. Should have left enough material to extend over both rid...

Thanks Jim,
I will check out the M 14 follower at Numrich.

Ron

Jim,
Thanks for your help and taking the time to measure the followers that you have.
Yes , the loading gate was a challange.
I will be checking with Numrich this morning.

Thanks again,
Ron Stokes

Jim, I agree with your assesment. I removed the loading door and it looks like it has had very little use. The follower on my M 141 is 2" long. The diameter of the first ring (closest to the bullet) is .469 The diameter of the second ring is .474 Is this consistant with other .35 Caliber Mod. 1...

Rickster, Thanks for your help. I checked the cartridge stop and it is in place and the screw was tight. I found a site online that sent me a copy of what they called a Remington Field Service Manuel . Advice below: Magazine Follower Comes too far back into Action Bar Cause- Loading door and action ...