Remington Society

I have a 1923 model and would like to know how to disassemble the magazine for cleaning and also the best way to remove and install a new cushion? I'm using an operators manual I printed off stevespages which,surprisingly,got into more diassembly info but nothing on mag or cuhion.Thank you.

I have a polychoke as shown in the picture and would like to know how to work it? Do I screw down till it bottoms out then make adjustments? It has notations 1)single turn full 2)cyl v 3)3v 4)modv 5)5v. What does each signify.I have used shotguns somewhat in the past but never was into them till now...

If I can wrangle the model 11 I am looking at for my wifes cousin and it turns out to be functional I would like to cut it down to a whipett ala Clyde Barrow.What would I have to do to do it legally? According to a guy at the range a class 3 is not necessay but the batf site may my head spin.Can som...

Thanks Frankie.I have since got it apart and was in a little rougher shape than I first thought.The stock screw would not budge.Had to drill it out.When I finally got it off the action spring/tube assy was crusted with rust.Like coins fused together from a reck.I sparyed it down with pb blaster and ...

When a part is referred to as a "dog" as in carrier dog for example exactly what is that? I've seen that mentioned at times in repair manuals but not exactly sure what it is.A picture of an example would be nice. Thanks.

In looking for info on this model I read somewhere that parts for pre 1927 and post 1927 are different? True or false?(please elaborate) Thanks.

By the way I printed out owners instruction from stevespages but looking for more detailed info.Also the saftey on this one is in front of the trigger inside trigger guard.The owners info shows behind trigger on rt side of guard.

I am looking at a mod 11 for my wifes couisn. From what I can figure it is a 1923(261xxx) but barrel is 1925(bs).Also some reapair codes on left side of barrell(rr ro3).The bore is good but surface rust and pitting on outside, few frozen screws,inside the receiver a yellowish gunk film.Can't retract...