The Remington Society of America
         Home         FIRST POST IS MODERATED!                     An organization dedicated to the collection and study of Remington firearms, ammunition and history
View unanswered posts | View active topics It is currently Mon Oct 20, 2014 3:11 pm



Reply to topic  [ 3 posts ] 
513 trigger adjust 
Author Message

Joined: Thu Oct 02, 2008 5:47 pm
Posts: 3
Post 513 trigger adjust
No matter which way I turn the two adjustment screws, I can't get the pull under 6 pounds. HELP?


Thu Oct 02, 2008 6:09 pm
Profile

Joined: Wed Feb 28, 2007 1:14 pm
Posts: 9
Location: Tomah, WI
Post Re: 513 trigger adjust
The trigger on the 513T is a bit tricky, and it cannot be set very low, 2.5 to 3 pounds is about it without some gunsmithing. Before going to a gunsmith it might be a good idea to check a few things first. If you haven't taken it apart and cleaned it completely it may have a lot of gunk and dried oil in it. The trigger spring and plunger in particular need to be removed, cleaned and lubed. Also check the sear screw, it can be overtightened. It is the staked screw, tighten fully and then back of a half turn and restake. If too tight it will bind the sear and make the trigger very heavy. The front screw in the bottom will increase the pull, the rear controls overtravel. You can increase the pull, but once the scew is no longer in contact with the trigger any lightening will require stoning and polishing the sear and its contact point on the firing pin. It is also possible that the trigger springis not original and was replaced with one from a different 5teen model. The other models had a stronger trigger spring. A quick fix would be to shorten the trigger spring and then use the trigger adjustment scew to increase pull if you overdo the shortening. Replacement springs and sears are available from Numrich.


Fri Oct 03, 2008 2:17 pm
Profile

Joined: Thu Oct 02, 2008 5:47 pm
Posts: 3
Post Re: 513 trigger adjust
Thanks Rich/WIS. I'm fairly certain the gun has not been tampered with, and I have thoroughly cleaned all the parts. This is my second 513, the previous having an acceptable trigger, but unfortunately it got wrapped around a tree along with me. I was never certain what, exactly, the two screws adjusted. I think this one will need a trip to a gunsmith. Despite the heavy pull, I still manage some pleasing, one hole groups now and then. The best so far has been five shots at 50 yards into a hole measuring .32 with Eley Club Extra which it seems to like. I think a better trigger would go a long way towrd helping me get groups like that more consistently...Dan


Fri Oct 03, 2008 3:00 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Yahoo [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.